Woodworking Wood Cabinet
 |
| Hartford Clamp Woodworking Clamp Wood Work Carpentry Cabinet Maker | |
 |
$40.00 Time Remaining: 9d 1h 7m Buy It Now for only: $40.00 |
| 6 PC FLAT METAL WOODWORKING WOOD GLUE CABINET SCRAPER TOOL PAINT SCRAPING SET | |
 |
$24.99 Time Remaining: 2d 2h 14m Buy It Now for only: $24.99 |
| 4 New F Bar Clamps 36 Woodworking Wood Cabinet Tools | |
 |
$19.99 Time Remaining: 4d 21h 9m |
| WOOD WORKING FACE FRAME CABINET GLUING GLUE CLAMP | |
 |
$21.99 Time Remaining: 21d 1h 27m Buy It Now for only: $21.99 |
| 6 New F Bar Clamps 36 Woodworking Wood Cabinet Tools | |
 |
$22.99 Time Remaining: 6d 40m |
Woodworking Wood Cabinet
need advise on on re-doing woodwork on old singer sewing machine cabinet?
want to re-do the cabinet, the laminite is coming apart. the wood frame appears to be sturdy including the drawer frames. i have most woodworking tools but have never attempted anything this detailed before. would appreciate advise from anyone with this type knowledge Thanks
if your referring to the "old" style the one with the foot pedal i had to redo my grandmothers but heres was just the top section or table section
you can either get a solid wood section from a hardware store probly have to order it like solid oak or cherry then measure the old piece and use a roughter to redo the edge work on it sand it smooth and restain and polly coat it
OR
you can get the very thin wood panel's from like home depot i mean thinner then 1/8 inch
if you do that all you have to do is remove all the pealing area until your at a smooth surface sand it down and use a lamanite type glue and apply the wood panel and use like a rubble rollar to make shure it is apply furmly and get all access glue out etc allow up to 48 hrs to cure then start sanding the edges where the glue came out and then refinish the piece with fresh stain and pollyurothain
David Termini makes a custom cherry wood cabinet part A