Caliper Case Scale
| No items matching your keywords were found. |
Caliper Case Scale
Reloading Materials question?
I'm looking to start reloading, and was wondering - to reload bottle neck rifle cartridges, am I missing anything?
First, let me apologize for any errors, as I'm posing this off of a mobile device...
Press
Dies
Scale
Powder Dispenser
Caliper
Bullet Puller
Scale
Caliber
Deburring Tool
Case Trimmer
Lube
Shell Holder
Hand Priming Tool
Tumbler and Media
Manual
Bullets Powder ect
Please, tell me if I'm missing anything.
Thanks, Kyle.
MR, those were included, except the boxes.
Tray. You will go nuts without one. This link is for universal trays, they also have caliber specific trays.
http://www.midwayusa.com/browse/BrowseProducts.aspx?pageNum=1&tabId=1&categoryId=15716&categoryString=9315***8938***15390***
Unless using spray on lube(which I prefer, way easier) you will need a case lube pad.
Two manuals, one from the press manufacturer, one from the bullet manufacturer. Reloading data from the powder companies is all online.
Primer pocket cleaning tool.
If you are doing mil-surp cases you will need to remove the crimp. There are crimp removal tools available. The best way is to swage them out. The cheaper, faster way is to ream them out. I have always reamed them out with good results. I use an electric drill with a countersink bit.
kawasaki ZZR400 ミドル 仲間達